a handy guide on how to deal with a tripped circuit breaker

If you have tripped a circuit breaker, it's important to follow the proper steps to reset it safely. Here's what to do:
​

1. Identify which breaker has tripped: Go to your electrical panel and locate the breaker that has tripped. It will be the one that has moved to the "off" position or is in the middle position between "off" and "on."
2. Turn off all appliances and devices: Before you reset the breaker, turn off all appliances and devices that are connected to that circuit. This will help prevent a power surge when the breaker is reset and protect your devices from damage.
3. Reset the breaker: To reset the breaker, firmly push the switch to the "off" position and then back to the "on" position. You may need to apply some force to get the switch to move. If the breaker trips again immediately or soon after resetting, it could indicate a problem with the circuit or device, and you should consult a licensed electrician.
4. Turn on your devices: Once you have reset the breaker, turn on your devices one at a time to make sure they are working properly. This will also help prevent another overload that could cause the breaker to trip again.

If you find that the breaker trips frequently, or if you are unsure of what is causing the issue, it is best to contact a licensed "electrician near me" in Windsor. An electrician can help identify the underlying problem and make any necessary repairs or recommend to upgrade service to 200 amps (which is often needed in older homes in Windsor, Ontario) to ensure your safety and the proper functioning of your electrical system.